ASUS K53E K53S K53SD K53SV is ASUS K series notebook model. The series flagship low-end users demand, cost-effective, but this series of notebook performance is very general, small memory, the machine is running slowly.

       Nowadays, many people like to add memory sticks to their notebooks, and improve notebook performance by increasing the memory space. This method can also be used on ASUS K53E K53S K53SD K53SV and so on these low-budget notebooks.

ASUS k series notebook disassemble add memory bar operation method

       1. After you have bought the proper memory module, unplug the ASUS notebook power supply and remove the notebook battery.

       2. Turn the ASUS notebook upside down and unscrew the back screw. At this point should pay attention to the screwdriver and the notebook's screw port is consistent. Must use the matching tool, or the screw is broken, not only affect the appearance, but also to ASUS notebook disassembly difficulties;

       3. Screws that have been screwed off must be placed in a container, or they can be placed in a transparent box of memory modules. To avoid randomly placed, resulting in heavy notebook when the screws can not be found;

       4, then unscrew the screws, it is necessary to take the cover panel on the notebook housing ASUS below. Push the lid gently forward and gently lift the lid to remove it;

       5. After uncovering the cover, you can roughly see the location of the ASUS notebook's internal hardware. From left to right are: hard disk, BIOS battery, memory slot and wireless network card. You need to install the memory module to the memory slot positions;

       6, on both sides of the memory slot, each with a white metal clip, is used to fix the inserted memory bar, to avoid falling.

       7. The memory module will be installed below. The installation method is to align the holes of the new memory module and the memory card slot. Insert it obliquely and insert the finger into the slot. After inserting, press it down to fix it on the white metal clip.

       8, this completes the installation. If you want to remove the memory module, you can use your hand to move the white metal card to the two sides and the memory module will automatically pop up.

       10. After the installation is complete, screw the ASUS back cover with a screw to reinstall the battery. Connect the power supply and turn it on. Test whether the installation is correct, or whether the memory stick is compatible and can be used normally. If you start normally, congratulations, you have installed a new memory.

How to check the new memory capacity

       After entering the ASUS notebook system, click "My Computer", right click and select "Properties". Check the system information, you can know the current installed new memory size.