This product can replace the following 2.5-inch NVMe SSD models:

Samsung XS1715 MZWEI1T6HAGP MZWEI800HAGM MZWEI400HAGM MZ6ER400HAGM

OCZ Z-Drive 6000 ZD6000-800GB ZD6000-1600GB ZD6000-3200GB

OCZ Z-Drive 6300 ZD6300-800GB ZD6300-1600GB ZD6300-3200GB

Intel 750 series SSD:SSDPE2MW400G4 SSDPE2MW800G4 SSDPE2MW012T4

Intel DC P3500 series SSD:SSDPE2MD016T401 SSDPE2MX400G401 SSDPE2MX012T401 SSDPE2MX020T401

Intel DC P3700 series SSD:SSDPE2MD400G4 SSDPE2MD016T4P SSDSC2BA100G3P

Note: This adapter is a 2.5-inch NVMe PCIe port, not a common 2.5-inch SATA port! The 2.5-inch SATA interface 15 PIN position on the adapter card is the power interface, the SATA interface is vacant, don't come and tell me that the SATA interface can't be used.

If you want to test this adapter card, your motherboard chipset must be Series 9 or above, windows 8.1 or windows 10 operating systems, AMD chipset motherboards are not recommended to test this card! If the NVME protocol disk is not installed with a dedicated hard drive, it is not compatible with the AS SSD test software. It is recommended to use Crystal DiskMark software to test the speed!

Please do not consult the speed of the adapter card, this adapter card only changes the interface shape, that is, from your original hard disk interface to connect the signal line, into another interface shape, such conversion does not need to go through the integrated circuit chip, since it does not go through the integrated circuit chip, so the speed performance of your hard disk has no impact. You don't need any drivers either (the operating system loads the driver of your hard drive, not the adapter, because there's no chip). The overall speed depends on how fast your hard drive is and how fast your computer can support it (many computers get a lot of speed increases by upgrading their BIOS).