Model:
AT850D
Category:
Hot Air Rework Station
Name:
AT850D Hot Air Rework Station
Hot Air Rework Station with accurate and stable temperature, ESD safe, suitable for QFP, PLCC, SOP, BGA, etc.
TECHNICAL SPECIFICATIONS
Power Consumption: 550W
Input Voltage: 220VAC10% 50HZ/(110V optional)
Temperature Range: 100 ~ 480
Display Mode: LED digital display
Tap Position of hot air output: 1~8 Level (stepless regulation)
Air Pump Type:Diaphragm Type Air Pump
Amount of hot air: 23L/min (MAX)
Noise: <52dBA
Physical Dimension of Principal Machine: 246(L)×135(W)×170(H)mm
Weight: Ca. 4.0Kg
FEATURES
Closed loop control of sensor, accurate and stable temperature, which can safely desolder the temperature-sensitive components, such as QFP, PLCC, SOP, BGA and so on.
Intelligent cooling system, Delay blast after operation, automatic power off when air temperature is less than 100°C.
The rework station has also new patent heater. Users can set temperature by the switching knob, can also control the hot air flux through switching knob. The SMD rework station uses original imported air pump with low vibration, noise design, which can make the workplace quiet.
Anti-static design to avoid bringing damage to PCB board due to static and creepage.