I believe that many users who have disassembled ASUS laptops know that ASUS notebooks are difficult to remove because many parts of them are designed with buckles. They need to be opened slowly. Sometimes improper use may damage the notebook, but the notebook will use a period of time. After time, in order to keep it in a good state of heat, it is necessary to disassemble the dust to clean it up. Today we introduce how to disassemble the notebook of ASUS X550. This tutorial also applies to ASUS X550, X550V, X550VC, and X450. , X450CA these several notebooks.

       Laptop disassemble tool preparation: screwdriver, card, brush, soft cloth and grease.

       1, first shut down the ASUS X550C, and then unplug the power connector and battery.

       2. Next, use a screwdriver to remove all the D-side screws and then remove the cover.

       3, can be found, the notebook's motherboard has a layer of plastic film protection, this layer of film we can not ignore it, directly remove the motherboard fixing screws, and then use the card on the left side of the motherboard USB interface location on the Internet, there are cards Buckle, and finally remove the motherboard.

       4. After removing the motherboard, remove the fan, remove the fixing screws first, then unplug the fan cables, and finally remove the fan.

       5, start cleaning the dust, with a brush and a soft cloth to repeatedly clean the cooling vents and fans, GPU, CPU surface of the silicone grease also need to be replaced, first with a soft cloth to wipe off the hair of silicone grease, and then coated with new silicone grease.

       6. After the cleaning work is completed, reassemble the ASUS X550C notebook according to the reverse steps above, and finally start the test.

       Matters needing attention: ASUS X550C notebook internal fixation screws to be classified and placed, so easy to assemble behind; remove the motherboard before using the card to open the buckle, can not directly open the motherboard, this will damage the motherboard.