Many people like to eat while using a notebook. Sometimes they accidentally touch a cup placed on the side and spill water on the keyboard, causing the keyboard to malfunction. At this time, the keyboard needs to be disassembled.

       How do you do that?

       Think about it, if someone is charged, what do you do?

       Go straight to pull him? Congratulations, you are not alone on Huang Quan Road!            The correct approach should be to turn off the power switch immediately. This is also the case with water in the laptop keyboard. The first task is to cut off the power and shut down the current system.

       Next, the water on the keyboard is adsorbed cleanly, and then the notebook is gently panned to the outside of the table, first place for some time to see, if the keyboard still fails to open the keyboard.

       For the dismantling of the keyboard, there are mainly three categories according to the categories of common notebook keyboards. Everyone needs to dismantle according to their own keyboard type. Here, HP ENVY 4 is taken as an example to introduce the disassembly method of a screw-type notebook keyboard.

       For example, an HP ENVY 4 keyboard is filled with water. First, prepare the adsorption tools such as cotton balls, toilet paper, etc., and soak the water stains that have penetrated under the keyboard. Then use a hair dryer to dry them and ensure that all moisture is completely removed. Do not rush to start the machine after the operation is completed, dry it, and then start it again the next day.

       If you still can not boot, you need to disassemble, this notebook keyboard is fixed with screws, the general position of the screw is at the bottom.

       First, prepare a square stool with your feet up. Gently translate the water notebook to the foot of the stool. Then use a screwdriver to remove the screws that hold the keyboard from the bottom up, and then lift the lower part of the keyboard upwards. Be careful not to use too much force. After the lower part of the entire keyboard is detached from the body, the keyboard can be pulled downagain.

       Note: As the water droplets will roll, try to avoid flipping and tilting the notebook during operation to prevent the intruding water droplets from rolling to other parts.

If the keyboard is completely unusable after entering the water, we will have to replace it on our own. After you buy your own model of keyboard, first insert the cable, and then test whether the input of each key is all normal, and then set the keyboard to the notebook after confirming it is correct. In addition, notebooks can now be used with an external USB keyboard. If you do not purchase your own model of keyboard, we can also use an external USB keyboard.