Before I bought a Thinkpad notebook to accompany me for several years, has been using pretty good, work and entertainment are "conscientious," but recently I found that the screen will be opened when the sound, just like cracking, closing is to see It was not as smooth as it used to be, nor was it as seamless as it used to be.

Xiaobian on Google checked, only to find that the original screen axis problems, because the screen hinge is a regular exercise of components, either open the top cover or close the top cover, you need to screen axis flexible exercise, long-term screen Seriously defaced shaft leading to poor operation, open the screen is not smooth too tight, too loose, a sound, etc., but also some users even more unfortunate, and some are accidentally fell to the ground screen shaft rupture, and some excessive force can screen axis Off.

Obviously, if this problem is not solved, it will always affect me to use a laptop, so uncomfortable and uncomfortable. What should I do?

The best way is to change the screen axis!

So I checked some related technology websites and forums, the ultimate success of the solution to this problem, and finishing the steps how to disassemble the notebook screen shaft and methods to share with you.

First of all, we must know that currently on the market the mainstream of the screen shaft can be divided into two sections of screen shaft, sunken screen shaft, single-section screen axis, so look at your notebook belongs to which design, the other through my own tests found that the original change Screen axis is actually very simple, not very complicated operation, the following for everyone to introduce the three main screen axis and dismantling methods.

One, two-stage screen axis

Features are fixed on the host, you can make the screen fit tighter, screen opening and closing angle greater, reaching 150 or 180 degrees, while leaving the rear of the host interface or vents.

Most of the current open the keyboard above the control panel cover, and then remove the laptop battery with a screwdriver, remove the screw above the shaft, with tweezers, carefully knocked on the left, remove the entire panel, you can see the screen axis, at Remove the B shell (borders around the screen) Remove the rubber gasket with tweezers, remove the screws, from the inside out, be careful to deduct the border, the screen axis is normal and the screen around the frame want to connect, you need to use a small cross screwdriver In addition, remove the screen axis, and then replace the new screen axis.

Second, sunken screen axis

When the laptop to the Super Ben Times, in order to make the notebook more slim, designers have developed a sunken screen axis, the screen is no longer limited by the thickness of the fuselage. However, due to the difficulty of the design and production process increases, sunken shafts tend to appear only in high-end notebook above.

Split law introduction:

First remove the touch screen control shell, remove the keyboard, remove the back of the screw, remove the shell placed above the screen shaft, the screen around the frame removal method, with a screwdriver to remove the screen axis; replace the new screen axis can be.

Third, single-section screen axis

With the two in one variant of the popular, how to use notebook more convenient to explore the direction of the designer, a single-section screen shaft came into being. It greatly increased the flexibility of the notebook, and even appeared in different types of flip this.

Split law introduction:

Remove the battery, remove all the screws on the back, carefully knock the keyboard with tweezers, remove the screws under the keyboard, remove the C shell is the keyboard can be around to see the screen axis, replace the new shell can be.

In general, screen-axis will not cause any damage to the laptop, but after all, also need to take apart time and effort once again for once and for all that is the best, so in the selection of screen axis, you can not only require the appropriate use , To choose a good quality, durable, original screen screen axis Caixing, we can go to some professional sites selling laptop accessories, such as laptop.gemwon.com is a professional selling original laptop accessories mall, all brands of notebook accessories can Buy, from the keyboard stickers to the laptop battery, I doubt if it is possible to buy all the accessories, and then assembled into a new laptop!

Through the above method, in fact, feel the disassembly of the laptop screen axis is not so difficult, just need to buy for their own laptop screen shaft, in a notebook removal tool, in fact, is that simple.