Lenovo Z500 disassemble the keyboard is not complicated. Before you officially disassemble, prepare something you will use: the new Lenovo Z500 keyboard, a screwdriver, and a card.

       1, first shut down the laptop, unplug the power plug, and then remove the laptop battery.

       2. Remove the two screws in the middle of Lenovo Z500 back cover. If you do not know which two of them you can also remove the screws, then turn the notebook to the front to open.

       3. Insert the card into the slot of the keyboard, pick up the keyboard along the edge of the keyboard, turn it to the back of the keyboard, unplug the keyboard cable, and then remove the keyboard.

       4. After removing the bad keyboard, you can install the newly purchased notebook keyboard. First insert the cable, then insert the keyboard into the keyboard slot, turn the notebook to the back, and remove the fixing screws. Close up and finally start the test.

Disassemble Note:

       Lenovo Z500 disassembles the keyboard to replace the keyboard step is simple, the only place needing attention is to use the card to pick up the part of the keyboard, must identify the gap to insert slowly to open the keyboard.