HP DV67002TX laptop is a widely used video game, quality is still very secure. However, during the long-term use, the accumulation of dust is inevitable inside the HP DV67002TX laptop. At this time, we need to disassemble it. So, what are the disassemble steps for the HP DV67002TX laptop?

       The first step: the preparation phase

       Before disassembling the Hewlett-Packard DV67002TX notebook computer, it is necessary to make full preparations, namely tool preparation and power-off processing. Among them, the tool preparation is to need to complete the tools needed to disassemble the machine, such as a flat-blade screwdriver, Phillips screwdriver and crowbar and other tools. Power-off processing refers to shutting down the HP DV67002TX notebook computer and disconnecting the power supply.

       The second step: remove the battery

       Removing the battery is also part of the computer's power-off process. Specifically, the laptop is turned over first, with the back of the notebook facing up. Then, the battery cover is opened by operating the switch of the battery cover, and the battery can be removed.

       The third step: remove the memory, optical drive and hard disk, etc.

       After the "second step" is completed, use the crowbar to open the upgrade bezel on the back of the HP DV67002TX laptop. You will see the laptop components behind the bezel. At this point, you can remove the memory according to the memory card by flipping the card spring; you can remove the optical drive and hard disk by using a screwdriver to unscrew the fixed optical drive and the hard disk. In the process of removing the memory, optical drive, and hard disk, care must be taken not to disconnect the cables violently.

       Step 4: Remove the wireless network card and keyboard

       After the "third step" is completed, use a screwdriver to unscrew the two screws of the fixed wireless network card to remove the wireless network card. In addition, after the wireless network card is removed, you can open a keyboard to fix the screw next to it. After removing the screw, turn it over and open the notebook computer, you can remove the keyboard of the notebook computer and see the inside of the notebook computer. constitute.

Step 5: Remove the motherboard, heat sink, fan, etc.

       After the "fourth step" is completed, you can see the laptop's motherboard, fan, and heatsink. Unscrew the fixing screws with a screwdriver to remove the main board, fan, and heat sink.

       At this point, the teardown of the HP DV67002TX notebook computer is basically completed. After disassemble, we can work as needed