Global Professional laptop Parts Seller
Thinkpad X200 teardown fan tutorial

       When the weather was hot, the notebooks became easy to get angry. They didn't use hot hands, and some of them even quit their business. They couldn't open the machine.

       How to do it, only to get a look at the repair shop, the owner smiled and said: 300 not change ah.

       I think about it, this ThinkPad X200 is now less than 1000 used the whole machine, this repair will be 300, this is not to grab money, because it is the old machine, and simply open their own repair, give it a new fan test test.

Go online to buy a suitable laptop fan, ready to open the screwdriver.

       First remove the battery, loosen the screws on the back shell, in order to facilitate the dismantling of the back, the hard drive is also drawn out.

       Then go back to the front, push the keyboard, take down the keyboard, pay attention to the cable to pull it down.

       Then hold your hands off, the cable must be unplugged, and then take the top U-shaped frame.

       Remove all the C side, you can see the inside of the machine, the first down the screw, unplug two cable and cat card card.

       After removing all the things on the board, you can slowly try to pick up the motherboard, because there is a power cable on the opposite side of the motherboard, this place to slowly, unplug the power cable.

       Remove the power cord, the motherboard can be taken out, and remove the three small screws above the fan, you can take the fan down.

       Finally, put on a new fan, install the boot test in reverse order, and as soon as the temperature becomes lower, it is not as hot as before, the problem is solved, and friends with this problem can also try this method according to my method. It's very effective.

Publish on 03/17/2018 by yechao, 111 hits.