Before disassembling the ASUS A550 notebook, you need to prepare several tools: a screwdriver, a card, a needle, a new screen, and anti-static gloves.

       1, the notebook unplug the power, the back surface of the notebook up on a flat table, remove the battery pack.

       2, in the ASUS A550 notebook screen's bottom border is hidden on the two screws, before the removal of screws to find a needle or other items with sharp corners, the top of the dust cover buckle down, remove the screw and cap attention Points are open and good.

       3, from the top of the border with the card to peel off the front and rear borders, pay attention to the card inserted not too deep, the action as soft as possible, do not hurt the wire in the border.

       4, after the separation of the current border, the front frame slowly put down, pay attention to the action must be please, but also slowly remove residual glue.

       5. Remove the screws and tapes from the four corners of the notebook screen, and place the removed screws in the category mark. Gently lower the screen parts.

       6. Put on gloves with antistatic grease, remove the screen from the backboard, and gently place it on the safety cloth, taking care not to tear the screen cable.

       7. Unplug the screen cable, the old screen is completely removed, and the new screen is installed below.

       8, take out the new screen, first connected to the cable interface, and then repeat the above steps to reinstall the screen, pay attention to the location of the screws to reinstall the correct installation.