MSI GE60, MS-16GA, MS-16GC disassemble the same method, this article describes the MSI GE60 teardown process, open the notebook can also clean up dust or DIY.

       Disassemble tool: 1 screwdriver.

       1: Remove the battery first, and press the power button for 5 seconds to save the power on the motherboard.

       2: Place the MSI GE60 notebook on the workbench with the backside facing up and use a screwdriver to fully unscrew the visible screws on the back.

       Note: Place the removed screws and place them on the outside. The blue screws on the outer shell are usually marked. Screw on the motherboard there are about three to four kinds.

       3: After the back screws are unscrewed, you can remove all screws on the D side without removing the C side. There are two screws that are not easily found, under the warranty and another white seal, remove the cover.

       4: Detached here can see the internal layout of the MSI GE60 notebook, the motherboard has reserved SSD and memory insert position, you can DIY your own notebook. If you need to clean up the dust, remove it directly with a screwdriver and loosen the heat sink fixing screw. Remember to prepare the cleaning tool in advance.

       5: Reassemble the MSI GE60 notebook. The installation method is the reverse of the steps described above.